Building Floaring Cleaning Service

Building Floaring Cleaning Service

This is most easily done with a high pressure hose pipe or water jet but if they are not available the tank can be filled with (preferably hot) waterand left to stand for a few hours. Drain all the water from the tank and collect for safe disposal as before.

The hoses, pumps and pipes used for filling and emptying the tank must also be cleaned. Flush a mixture of hot water and detergent through the pipes and pump to remove deposits and other waste material.

Fill the tank a quarter full with clean water. Sprinkle 80 grams of granular HSCH into the tank for every 1000 litres total capacity of the tank. Fill the tank completely with clean water, close the lid and leave to stand for 24 hours.

Book Building Floaring Cleaning Service

Frequently Asked Questions?

The time taken by floor cleaning staff to clean the floor depends on the area of the floor and type of cleanings service you opt for. However, it should not take more than a few hours.
Yes, usually these cleaning companies send all the cleaning equipment required to execute the service. It is suggested you confirm the same at the time of booking the service.
Ideally, you do not need to make any additional arrangements.